can-newsletter.org - Miscellaneous

CAN Newsletter magazine

Slip rings connect reliably CAN bus-lines

2019-09-05 Especially in construction machine and equipment, slip rings are used to transfer data signals and power to rotating cabs. Intermittent open or high resistance needs to be avoided, to guarantee a reliable signal transmission.

CAN Newsletter magazine

CAN-based monitoring system for spindle bearings

2019-09-04 Schaeffler’s Spindle-Sense monitoring system reduces downtimes and increases utilization of machine capacity. The variant C-A1 outputs the measurements via CAN.

CAN Newsletter magazine

Interview: Swedish shopping center with CANopen-Lift control system

2019-09-04 One of the biggest projects with a CANopen-Lift control system in Sweden is almost done. The interview by Jonas Tomasson (Safeline Group) with Roger Wickman (Hisselektronik) gives some more details.

CAN Newsletter magazine

Interview: Encoders for hydraulic and telescopic cylinders

2019-09-04 Draw-wire sensors based on rotary encoders have some advantages compared to other solutions. Matthias Roth, Siko’s Industry Manager Mobile Automation explains them on the example of the SGH series.

CAN Newsletter magazine

"The data processing moves into the edge"

2019-09-04 Should IoT be integrated directly into the device, into a machine part, or directly into the sensors and actuators? SYS TEC Electronic answered these questions in an interview.

Common-mode choke

Useable for CAN FD devices

2019-08-05 Murata (Japan) introduces a CAN FD Class-3 common mode choke. It confirms to IEC 62228-3.

Free service

Air conditioning solutions via boomerang

2019-07-10 Boomerang is a free service from Eberspaecher Kalori. It involves sending back a modeled cab, with multiple alternative solutions for the integration of standard or specific components.

CAN Newsletter magazine

The low-cost hardware revolution

2019-07-03 This article focuses on opportunities and challenges of low-cost developer boards in the industry.

CAN Newsletter magazine

Future electric mobility with CAN in-wheel system

2019-07-02 Currently, electric vehicles are competing on acceleration performance and range, but in the future, the discussion will be less about cars and more about mobility, of which electric vehicles will be one of the main pillars.

Quick-change system

For handling weights up to 50 kg

2019-06-18 The pneumatically actuated robot quick-change system SWS-046 by Schunk allows change of different gripping systems and tools at the front end. It comes with modules for connecting actuators and sensors electrically. One supports CAN./strong>

Collaboration

Software now supports CAN hardware

2019-06-06 Kvaser has announced that the Elektrobit Assist ADTF 3 software now supports Kvaser’s CAN hardware portfolio.

Data / signal transmission

M12 cable connectors

2019-05-27 The M12 Mini from Provertha is a M12 cable connector for space-saving fieldbus connection. It serves as a Devicenet / CAN solution.

CAN FD

Repeater for tree and star topologies

2019-03-18 Ixxat, a brand of HMS Networks (Sweden), has released CAN FD repeaters. They are galvanic-isolated.

Twisted-pair

CAN cable suitable for J1939 networks

2019-03-18 TE Connectivity has launched its portfolio of Raychem copper cables. They are designed for bit-rates up to 1 Mbit/s.

Protection array

ESD protection for CAN nodes

2019-02-20 Semtech (USA) has launched the µClamp2492SQ circuitry, which is AEC-Q100 qualified. The company established in 1967 is a supplier of analog and mixed-signal semiconductors.

Radiation for satellites

Digital isolator with CAN-capability

2019-01-31 Renesas Electronics launched digital isolators with superior radiation performance for small satellites in low earth orbit. The ISL71610M and ISL71710M provide isolation protection for power supply stages and serial communications interfaces such as ...

Slip ring

Designed for wind turbine application

2018-12-11 In USA, Heidenhain distributes exclusively the SXC168 slip ring by LTN Servotechnik (Germany).

SPS IPC Drives 2018

Cable technologies for factory automation

2018-11-27 Leoni presents cable technologies for factory automation at this year’s SPS IPC Drives 2018 trade fair in Nuremberg (Germany) in hall 2, booth 230. The portfolio also includes CAN cables.

Electronica 2018

Common-mode choke inductor for CAN

2018-11-15 Fastron has announced the 1812CMF common-mode choke inductor measuring 4,7 mm x 3,4 mm x 2,8 mm. The component consists of a ferrite core with two simultaneously wound copper wires.

Isobus

Breakaway, diagnostic, and in-cab connectors

2018-11-05 The ISO 11783-2 standard specifies the so-called Isobus connectors. Multiple suppliers offer such products.